Skip to main content

Power

power.help#

Shows this help information.

power.hibernate#

Power down system and put device into hibernate state.

OPTIONAL ARGUMENTS

  • delay (str): Delay in seconds before powering down. Default is 60.
  • confirm (bool): Acknowledge the execution of this command. Default is False.
  • reason (str): Reason code that tells why we decided to hibernate. Default is unknown.

power.reboot#

Reboot system immediately.

OPTIONAL ARGUMENTS

  • reason (str): Reason code that tells why we decided to reboot. Default is unknown.

power.request_reboot#

Request for a future system reboot.

OPTIONAL ARGUMENTS

  • pending (bool): Default is True.
  • immediately (bool): Default is False.
  • reason (str): Reason code that tells why we decided to reboot. Default is unknown.

power.restart_3v3#

Restart the 3V3 power supply. This will restart the modem and also the accelerometer the hard way.

WARNING: Any open serial connections to the modem (eg. in ec2x_manager and tracking_manager) may cause the system to freeze or block the TTYs and make new numbering after modem is re-initialized. It is recommended to use ec2x.power_off to restart modem.

OPTIONAL ARGUMENTS

  • confirm (bool): Acknowledge the execution of this command. Default is False.
  • reason (str): Reason code that tells why the 3V3 supply is restarted. Default is unknown.

power.sleep#

Power down system and put device into sleep state.

OPTIONAL ARGUMENTS

  • interval (int): Sleep interval in seconds. Default is 60.
  • delay (str): Delay in seconds before powering down. Default is 60.
  • modem_off (bool): Power off 3V3 supply to modem on mPCIe slot. Default is False.
  • acc_off (bool): Put accelerometer into standby. Default is False.
  • confirm (bool): Acknowledge the execution of this command. Default is False.
  • reason (str): Reason code that tells why we decided to sleep. Default is unknown.

power.sleep_timer#

Setup sleep timer to schedule power off upon inactivity.

note

Do not access pillar data in this function as they will not be available when called from engines (separate processes).

OPTIONAL ARGUMENTS

  • add (str): Add a timer with the given name.
  • clear (str): Clear sleep timer(s) matching the given name. Use * to clear all.
  • enable (bool): Enable or disable timer. DEPRECATED: Use add or clear instead.
  • period (int): Timer period in seconds before performing sleep. Default is 1800.
  • reason (str): Reason code that tells why we decided to sleep. Default is unknown.

power.status#

Get status and debug information regarding power management.